2011 - Full complement track roller - stud type – with an axial guide rib, with or without an eccentric axle box
This type of roller is characterized by an integrated stud and a thick outer ring PRODUCTS <!– @page { size: 21cm 29.7cm; margin: 2cm } P { margin-bottom: 0.21cm } –>
can rotate directly on mating track
Typically used when high load capacity and high shock resistance are required it can, also, support angular misalignments because of the particular of outer surface generatrix
The axial guide (non-separable assembly) gives the roller the ability to support axial loads.
The full complement roller can support very high loads.
The axial guide rib between the two rows creates an extra room for the lubricant thus improving the operation of the roller.
A watertight version and labyrinth shield version are available.
It can be provided with an eccentric axle box to allow the radial adjustement.
| Production range | mm | mm | mm |
|---|---|---|---|
| d | D | B | |
| Min. Values | 16 | 35 | 52 |
| Max. Values | 30 | 90 | 100 |
For commercial questions, please, contact:
For technical questions, please, contact:
Please register to the secured area to view detailed technical documents.