Combined bearing for steel I-Sections
3002
The combined bearing for steel C-sections used in the forklifts is characterized by two track rollers connected to each other by a mild-steel pin.
The suitably shaped rollers separately support the axial and radial loads.
This type of combined bearing does not permit any axial adjustments.
The watertight version and the one with a retaining cap (relubricatable) are available.
Some application fields
- forklift (mast roller)
Alternative design
- in according to customer drawing
| Range di produzione | mm d |
mm D |
mm B |
|---|---|---|---|
| Valori minimi | 30 | 70.35 | 40.5 |
| Valori massimi | 80 | 165 | 61 |
